| MODEL |
9700 |
| Years Produced |
(2018-present) |
| Manufacturer |
Liebherr |
| Engine |
D9512 A7 04 |
| Emission |
Tier 4 Final/Stage V |
| Displacement L |
24.2 L |
| Cylinders |
V12 |
| Fuel System |
Common rail plus four valves |
| Air compressor |
Standard |
| Body Type |
Wide Body |
|
|
| COOLING SYSTEM |
|
| Cooling system capacity |
34.3 gal (130 L) |
| Cooling fan drive |
Direct |
|
|
| GROUND DRIVE |
|
| Maximum transport speed |
12/16/19/25 mph(20/25/30/40km/h) |
| Rear Axle type |
Hydro-Mechanical 4- WD |
| Automatic wet brake system |
Standard |
| Engine rpm- Management |
Standard |
|
|
| LENGTH OF CUT |
|
| 40 knives cutterhead |
0.27-1"LOC/1100 rpm (7-26mm LOC/1100 rpm) |
| 48 knives cutterhead |
0.24-0.87in LOC/1100 rpm(6-22mm LOC/1100 rpm) |
| 56 knives cutterhead |
0.16-0.71in LOC/1170 rpm(4-18mm LOC/1170 rpm) |
|
|
| FEEDROLLS |
|
| Feed roll frame opening |
Swing away, 37-45"(angle) |
| Number feedrolls |
Four |
| Metal detector |
Standard |
| Stone detector |
Optional |
| Feeding channel width,front |
32.68 in(830mm) |
| Hydro feedroll drive with infinite Variable Length of Cut |
Standard |
|
|
| HEADER CONNECTION |
|
| Infinitely varialbe header drive |
Standard |
| Lateral Pivoting frame |
Standard |
| Multi coupler |
Standard |
| Auto PTO coupler |
Optional |
| Header height and float pressure control |
Standard |
| Hydraulic acutated lateral header tilt |
Optional Advanced Header Control (AHC) |
| Grass pick-ups (transport width) |
9.8,13.1,14.8ft (3.0,4.0,4.5m) |
| Corn headers |
8,10,12 rows |
|
|
| CUTTERHEAD |
|
| Type |
Dura-Drum cutterhead |
| Cutterhead width |
33.46 in (850mm) |
| Cutterhead diameter |
26.38 in (670mm) |
| Speed at rated engine speed |
1170 rpm / 1350 (Option) |
| Number of knives |
40-48-56 |
| Knife types available (crop) |
Straight (grass/universal) Curved (corn) |
| Shearbar options |
Grass,Corn or Dura Line Plus |
| Fine Shearbar Adjust |
Standard |
| Quick Shearbar Adjust |
Standard |
|
|
| KNIFE SHARPENING SYSTEM |
|
| Reverse rotation |
Yes |
| Sharpening control |
Remote from Cab |
| Sharpeining modes |
Grinding and finishing |
|
|
| KERNEL PROCESSOR |
|
| Available KP types |
Premium KP, XSTREAM KP |
| Quick KP removal |
Crane from remote controlled electric hoist |
|
|
| KERNEL PROCESSING OPTIONS |
|
| PREMIUM KP |
|
| Housing |
Standard KP housing |
| Lubrication |
Grease |
| Roll daimeter |
9.45 in (240mm) |
| Speed differential |
32% (optional: 40%) |
| Corn, saw teeth number |
118 |
| Wholecrop, saw teeth number |
178 |
|
|
| XSTREAM KP |
|
| Housing |
Heavy Duty Housing |
| Lubrication |
Pressurized oil |
| Roll diameter |
9.84in (250mm) |
| Speed differential (%) |
50 |
| Corn, saw teeth number |
110/145 |
| Wholecrop, saw teeth number |
145/165 |
|
|
| CROP ACCELERATOR |
|
| Rotor Diameter / Width |
22 /24 in. (560/620mm) |
| Number of blades |
10 |
| Rotor Speed (rpm) |
1800 |
|
|
| SPOUT |
|
| Rotation |
210 degrees |
| Reach from center line (ft)(optional)(ft) |
15.5 ft (optional:19.25ft)22ft{4.73m (optional: 5.87m)6.71m} |
| Working height (maximum) |
Height to spout: 21.7ft(6.6m) |
| Spout Camera |
Optional |
| Active Fill Control |
Optional |
|
|
| AGRICULTURAL MANANGEMENT SOULUTIONS |
|
| Yield monitoring |
Harvest Monitor optional |
| Documentaion |
Harvest Doc optional |
| Crop analysis |
HarvestLab 3000 optional |
| Length-of-cut control based on crop |
Auto LOC optioanl with HavestLab 3000 |
| Assisted steering |
AutoTrac or Manual RowSense optional |
|
|
| Weights and Dimensions |
|
| Transport Length (without header) |
21.7ft (6.6m) |
| Transport width (without header) |
10.2-11.5ft (1.3-3.49m) |
| Transport height (to top of roof) |
Below 13.1ft (4.0m) |
