SPFH John Deere 8600
Model
8600
Years Produced
(2015- current)
Maximum power at 1800 rpm
459 kW625 PS / 616 hp
Engine
TypePowerTech™ PSS 13.5LExhaust emission regulation compliancy - Final Tier 4 / Stage VDisplacement13.5 L823.8 cu in.ModelEurope: 6135HZ021North America: 6135HZ022CylindersInline 6
Fuel system
Unit injectors plus four valves
Fuel tank capacity
1100 L290.6 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)
43 L11.4 U.S. gal.
Hand wash tank capacity
ENGINE POWER
Maximum power at 1800 rpm
459 kW625 PS / 616 hp
Maximum power at 1900 rpm
Rated power at 2100 rpm
428 kW582 PS / 574 hp
Fuel tank capacity
1100 L290.6 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)
43 L11.4 U.S. gal.
ENGINE
Manufacturer
John Deere
Type
PowerTech™ PSS 13.5LExhaust emission regulation compliancy - Final Tier 4 / Stage V
Model
Europe: 6135HZ021North America: 6135HZ022
Displacement
13.5 L823.8 cu in.
Cylinders
Inline six
Speed on road
1400-2100 rpm
Engine/ground speed management
Optional
Fuel system
Unit injectors plus four valves
COOLING SYSTEM
Cooling system capacity
113 L29.85 U.S. gal.
Cooling fan drive
Direct
DRIVELINE
Ground drive
Standard: Hydrostatic, 3-speed - manual shift with helical gearsEngine rpm on road: 1650 rpmOptional: Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm
Hydraulics
Load sensing
Crop harvesting unit
Harvest channel standard
Crop flow components
Low-friction crop-flow concept
Main clutch
Dry clutch
Number of discs
One disc
Main driveband
Reinforced with Kevlar inserts
Belt tensioning
Active, hydraulic pressure
Main driveband, polybelt belts
Six ribs
HEADER DRIVE
Type
Heavy Duty Gearbox (i=3.75)65cc/63cc (pump/motor displacement)
ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM
Type/voltage
12 V
Batteries/battery quantity/capacity
2 x 174 amp-hr
Alternator
200 amp
Hydraulic system capacity
50 L13.2 U.S. gal.
GROUND DRIVE
Type
Standard: hydrostatic, 3-speed manual shiftOptional: Prodrive™, autoshift transmission
Differential lock
Manual or automatic (optional comes with ProDrive)
Maximum transport speed
Hydrostatic transmission: 25 / 30 km/h15.5 / 18.6 mphProDrive transmission: 20 / 25 / 30 / 40 km/h12.4 / 15.5 / 18.6 / 24.9 mph
Rear axle type
Hydro-mechanical 4WD
Automatic wet brake system
Available with ProDrive transmission
Engine rpm - Management
Optional
CAB
Tilt and extend steering column
Standard
Air conditioning and heater
Standard - ClimaTrak
Cool box
Optional
Trainee seat
StandardLeather seat optional
Hectare counter
Standard
Operator information system
Cornerpost displayArmrest display (Touchscreen)Side rail display (Touchscreen) optional
CAN-BUS electronics
Standard
Operator's seat
Air-suspension seat optionalLeather seat optional
Side window wiper
Rear and side window wiper optionalParallel-type windscreen wiper
Electric adjust and heated
Optional on rear view mirrors
Rear view mirrors
Standard
Hand wash tank capacity
MACHINE MANAGEMENT SOLUTIONS
Yield monitoring
Harvest Monitor™ optional
Documentation
Harvest Doc™ optional
Crop analysis
HarvestLab™ 3000 optional
Length-of-cut control based on crop parameter
Infinitely variable length-of-cut (IVLOC™) standardAutoLOC™ optional with HarvestLab 3000
Satellite (GPS) assisted steering
AutoTrac or Manual RowSense optional
CROP-HARVESTING UNITS
Header height control
Advanced header control (AHC) optional
Grass pick-ups (transport width)
3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ftStandard or Premium Line
Maize or corn headers
Driveline
Infinitely variable header driveOptional dual header drive for grass pick-up
Header connection
Multi-coupler for hydraulic and electricAuto PTO coupler optional
HARVEST CHANNEL
Width
660 mm26 in.
LENGTH OF CUT
Range
Range at 1100 rpm:40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps56 knives: 5-19 mm (0.20-0.75 in.) LOC / 1 mm (0.04 in.) stepsRange at 1200 rpm:56 knives: 4-17 mm (0.16-0.67 in.) LOC / 1 mm (0.04 in.) steps64 knives: 3-15 mm (0.12-0.59 in.) LOC / 1 mm (0.04 in.) steps
FEEDING SYSTEM/FEEDROLLS
Feed roll frame opening
Swing away, 37-45 degree (angle)
Number
Four
Metal detector
StandardStone detector is optional
Width, front
660 mm26 in.
Standard feed roll drive
Hydro feedroll drive IVLOC standardInfinitely variable header drive speed standard
Optional feed roll drive
CUTTERHEAD
Type
Dura-Drum™ cutterhead
Cutterhead housing width
686 mm27 in.
Knife drum width
680 mm26.8 in.
Knife drum diameter
670 mm26.3 in.
Speed at rated engine speed
Standard - 1100 rpmOptional - 1200 rpm
Knife types available (crop)
Straight - grassCurved - corn
Number of knives
40 - 48 - 56 - 64
Shear bar, reversible
Grass, corn, or Dura Line Plus
Shear bar adjust
Fine shearbar adjustQuick shearbar adjust
KNIFE SHARPENING SYSTEM
Reverse rotation
Yes
Automatic from cab
Yes, remote from cab
Reverse drive
Standard
Reverse speed
Sharpening modes
Grinding and finishing
KERNEL PROCESSOR
Type
Premium KP (8100-8600)XStream KP (8300-8600)
Quick-change
Quick kernel processor - swing in/swing out
Quick KP removal
Optional: Crane with remote-controlled electric hoist
JOHN DEERE PREMIUM KP
Housing
Standard KP housing
Lubrication
Grease
Roll diameter
240 mm9.45 in.
Speed differential / Roll speed (lower)
32 percentOptional 40 percent
Maize, roll teeth number (speed differential)
118 (32 / 40 percent)
Wholecrop, roll teeth number (speed differential)
178 (32 / 40 percent)
Sorghum, roll teeth number (speed differential)
238 (32 percent)
Weight
320 kg145 lb
Available KP rolls
Standard sawtoothDuraline sawtoothWhole crop
JOHN DEERE XSTREAM KP
Housing
Heavy duty housing with KP roll quick exchange system
Roll diameter
Pressurized oil
Speed differential / Roll speed (lower)
250 mm9.84 in.
Bearing temperature monitoring system
50 percent
Maize, roll teeth number (speed differential)
Optional
Wholecrop, roll teeth number (speed differential)
110 / 145 (50 percent)
Sorghum, roll teeth number (speed differential)
145 / 165 (50 percent)
Weight
238 (32 percent)
Available KP rolls
Lubrication
Duraline sawtoothDuraline XCutWhole crop XCut
SERRATED ROLLER (KERNEL PROCESSOR)
Maize, roll teeth number (speed differential)
Wholecrop, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight
DISK TYPE (KERNEL PROCESSOR)
Number of disks (top/bottom)
Diameter of disks
Weight
BLOWER/CROP ACCELERATOR
Rotor diameter/housing width
Rotor diameter: 560 mm22.86 in.Housing width: 540 mm21.26 in.
Number of blades
10
Speed (option)
1800 rpm
SPOUT
Rotation, degrees
210 degree (angle)
Hydraulic height position
Hydraulic raise and lower standardAutomatic spout positioning optional
Double-cap deflection
Standard
Number of wear liners
Reach from center line (Optional)
MAINTENANCE
Rotary radiator screen cleaner
Standard
Automatic lubrication system
AutoLube optional
Engine oil and filter change duration
JD+50™ II oil: 350 hoursOther oil: 250 hours
PROPELLING DRIVE
Standard
Hydrostatic, 3-speed - manual shift with helical gears
TRANSMISSION
Type
Standard: Hydrostatic, 3-speed - manual shift with helical gearsHydro-mechanical rear axle optional
Weight and Dimension
With front tires
710/70R42
With rear tires
620/60R30
Transport length (without header)
6.6 m21.7 ft
Transport width (without header)
3-3.7 m9.84-12.1 ft
Transport height (to cab roof)
3.89 m12.75 ft
Working height (maximum)
Height to spout: 6.60 m21.65 ft