Image

SPFH John Deere 8100

Model 8100
Years Produced (2015- current)
Maximum power at 1800 rpm
Engine TypePowerTech™ PSS 9.0LExhaust emission regulation compliancy - Final Tier 4 / Stage VDisplacement9 L549 cu in.ModelEurope: 6090HZ029North America: 6090HZ030CylindersInline 6
Fuel system Common rail plus four valves
Fuel tank capacity 1,100 L290.6 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level) 43 L11.4 U.S. gal.
Hand wash tank capacity
ENGINE POWER
Maximum power at 1800 rpm
Maximum power at 1900 rpm 279 kW380 PS / 375 hp
Rated power at 2100 rpm 251 kW341 PS / 337 hp
Fuel tank capacity 1100 L290.6 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level) 43 L11.4 U.S. gal.
ENGINE
Manufacturer John Deere
Type PowerTech™ PSS 9.0LExhaust emission regulation compliancy - Final Tier 4 / Stage V
Model Europe: 6090HZ029North America: 6090HZ030
Displacement 9 L549 cu in.
Cylinders In line six
Speed on road 1400-2100 rpm
Engine/ground speed management Optional
Fuel system Common rail plus four valves
COOLING SYSTEM
Cooling system capacity 82 L21.66 U.S. gal.
Cooling fan drive Direct
DRIVELINE
Ground drive Standard: Hydrostatic, 3-speed - manual shift with helical gearsEngine rpm on road: 1650 rpmOptional: Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm
Hydraulics Load sensing
Crop harvesting unit Harvest channel standard
Crop flow components Low-friction crop-flow concept
Main clutch Dry clutch
Number of discs One disc
Main driveband Reinforced with Kevlar inserts
Belt tensioning Active, hydraulic pressure
Main driveband, polybelt belts Five ribs
HEADER DRIVE
Type Medium Duty Gearbox (i=3.0)65cc/63cc (pump/motor displacement)
ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM
Type/voltage 12 V
Batteries/battery quantity/capacity 1 x 174 amp-hr
Alternator 200 amp
Hydraulic system capacity 50 L13.2 U.S. gal.
GROUND DRIVE
Type Standard: hydrostatic, 3-speed manual shiftOptional: Prodrive™, autoshift transmission
Differential lock Manual or automatic (optional comes with ProDrive)
Maximum transport speed Hydrostatic transmission: 25 / 30 km/h15.5 / 18.6 mphProDrive transmission: 20 / 25 / 30 / 40 km/h12.4 / 15.5 / 18.6 / 24.9 mph
Rear axle type Hydro-mechanical 4WD
Automatic wet brake system Available with ProDrive transmission
Engine rpm - Management Optional
CAB
Tilt and extend steering column Standard
Air conditioning and heater Standard - ClimaTrak
Cool box Optional
Trainee seat StandardLeather seat optional
Hectare counter Standard
Operator information system Cornerpost displayArmrest display (Touchscreen)Side rail display (Touchscreen) optional
CAN-BUS electronics Standard
Operator's seat Air-suspension seat optionalLeather seat optional
Side window wiper Rear and side window wiper optionalParallel-type windscreen wiper
Electric adjust and heated Optional on rear view mirrors
Rear view mirrors Standard
Hand wash tank capacity
MACHINE MANAGEMENT SOLUTIONS
Yield monitoring Harvest Monitor™ optional
Documentation Harvest Doc™ optional
Crop analysis HarvestLab™ 3000 optional
Length-of-cut control based on crop parameter Infinitely variable length-of-cut (IVLOC™) standardAutoLOC™ optional with HarvestLab 3000
Satellite (GPS) assisted steering AutoTrac or Manual RowSense optional
CROP-HARVESTING UNITS
Header height control Advanced header control (AHC) optional
Grass pick-ups (transport width) 3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ftStandard or Premium Line
Maize or corn headers
Driveline Infinitely variable header driveOptional dual header drive for grass pick-up
Header connection Multi-coupler for hydraulic and electricAuto PTO coupler optional
HARVEST CHANNEL
Width
LENGTH OF CUT
Range 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm56 knives: 5-19 mm (0.20-0.75 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm56 knives: 4-17 mm (0.16 - 0.67 in.) LOC / 1 mm (0.04 in.) steps / 1200 rpm
FEEDING SYSTEM/FEEDROLLS
Feed roll frame opening Swing away, 37-45 degree (angle)
Number Four
Metal detector StandardStone detector is optional
Width, front 660 mm26 in.
Standard feed roll drive Hydro feedroll drive IVLOC standardInfinitely header drive speed standard
Optional feed roll drive
CUTTERHEAD
Type Dura-Drum™ cutterhead
Cutterhead housing width 686 mm27 in.
Knife drum width 680 mm26.8 in.
Knife drum diameter 668 mm26.3 in.
Speed at rated engine speed 1100 rpm
Knife types available (crop) Straight - grassCurved - corn
Number of knives 40 - 48 - 56
Shear bar, reversible Grass, corn, or Dura Line Plus
Shear bar adjust Fine shearbar adjustQuick shearbar adjust
KNIFE SHARPENING SYSTEM
Reverse rotation Yes
Automatic from cab Yes, remote from cab
Reverse drive Standard
Reverse speed
Sharpening modes Grinding and finishing
KERNEL PROCESSOR
Type Premium KP (8100-8600)XStream KP (8300-8600)
Quick-change Quick kernel processor - swing in/swing out
Quick KP removal Optional: Crane with remote-controlled electric hoist
JOHN DEERE PREMIUM KP
Housing Standard KP housing
Lubrication Grease
Roll diameter 240 mm9.45 in.
Speed differential / Roll speed (lower) 32 percentOptional 40 percent
Maize, roll teeth number (speed differential) 118 (32 / 40 percent)
Wholecrop, roll teeth number (speed differential) 178 (32 / 40 percent)
Sorghum, roll teeth number (speed differential) 238 (32 percent)
Weight 320 kg145 lb
Available KP rolls Standard sawtoothDuraline sawtoothWhole crop
JOHN DEERE XSTREAM KP
Housing Heavy duty housing with KP roll quick exchange system
Roll diameter Pressurized oil
Speed differential / Roll speed (lower)
Bearing temperature monitoring system
Maize, roll teeth number (speed differential)
Wholecrop, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight
Available KP rolls
Lubrication
SERRATED ROLLER (KERNEL PROCESSOR)
Maize, roll teeth number (speed differential)
Wholecrop, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight
DISK TYPE (KERNEL PROCESSOR)
Number of disks (top/bottom)
Diameter of disks
Weight
BLOWER/CROP ACCELERATOR
Rotor diameter/housing width Rotor diameter: 560 mm22.86 in.Housing width: 540 mm21.26 in.
Number of blades 10
Speed (option) 1800 rpm
SPOUT
Rotation, degrees 210 degree (angle)
Hydraulic height position Hydraulic raise and lower standardAutomatic spout positioning optional
Double-cap deflection Standard
Number of wear liners
Reach from center line (Optional) 6 or 8 row: 4.73 m15.5 ft10 row: 5.87 m19.3 ft12 row: 6.71 m22 ft
MAINTENANCE
Rotary radiator screen cleaner Standard
Automatic lubrication system Optional
Engine oil and filter change duration JD+50™ II oil: 500 hoursOther oil: 250 hours
PROPELLING DRIVE
Standard Hydrostatic, 3-speed - manual shift with helical gears
TRANSMISSION
Type Standard: Hydrostatic, 3-speed - manual shift with helical gearsHydro-mechanical 4WD rear axle optional
Weight and Dimension
With front tires 710/70R42
With rear tires 620/60R30
Transport length (without header) 6.5 m21.4 ft
Transport width (without header) 3-3.5 m9.84-11.5 ft
Transport height (to cab roof) 3.89 m12.75 ft
Working height (maximum) Height to spout: 6.60 m21.65 ft
Approximate weight (without header)