| Model | 8600 |
|---|---|
| Years Produced | (2015- current) |
| Maximum power at 1800 rpm | 459 kW625 PS / 616 hp |
| Engine | TypePowerTech™ PSS 13.5LExhaust emission regulation compliancy - Final Tier 4 / Stage VDisplacement13.5 L823.8 cu in.ModelEurope: 6135HZ021North America: 6135HZ022CylindersInline 6 |
| Fuel system | Unit injectors plus four valves |
| Fuel tank capacity | 1100 L290.6 U.S. gal. |
| DEF tank capacity ( for FT4 or EU Stage V emission level) | 43 L11.4 U.S. gal. |
| Hand wash tank capacity | |
| ENGINE POWER | |
| Maximum power at 1800 rpm | 459 kW625 PS / 616 hp |
| Maximum power at 1900 rpm | |
| Rated power at 2100 rpm | 428 kW582 PS / 574 hp |
| Fuel tank capacity | 1100 L290.6 U.S. gal. |
| DEF tank capacity ( for FT4 or EU Stage V emission level) | 43 L11.4 U.S. gal. |
| ENGINE | |
| Manufacturer | John Deere |
| Type | PowerTech™ PSS 13.5LExhaust emission regulation compliancy - Final Tier 4 / Stage V |
| Model | Europe: 6135HZ021North America: 6135HZ022 |
| Displacement | 13.5 L823.8 cu in. |
| Cylinders | Inline six |
| Speed on road | 1400-2100 rpm |
| Engine/ground speed management | Optional |
| Fuel system | Unit injectors plus four valves |
| COOLING SYSTEM | |
| Cooling system capacity | 113 L29.85 U.S. gal. |
| Cooling fan drive | Direct |
| DRIVELINE | |
| Ground drive | Standard: Hydrostatic, 3-speed - manual shift with helical gearsEngine rpm on road: 1650 rpmOptional: Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm |
| Hydraulics | Load sensing |
| Crop harvesting unit | Harvest channel standard |
| Crop flow components | Low-friction crop-flow concept |
| Main clutch | Dry clutch |
| Number of discs | One disc |
| Main driveband | Reinforced with Kevlar inserts |
| Belt tensioning | Active, hydraulic pressure |
| Main driveband, polybelt belts | Six ribs |
| HEADER DRIVE | |
| Type | Heavy Duty Gearbox (i=3.75)65cc/63cc (pump/motor displacement) |
| ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM | |
| Type/voltage | 12 V |
| Batteries/battery quantity/capacity | 2 x 174 amp-hr |
| Alternator | 200 amp |
| Hydraulic system capacity | 50 L13.2 U.S. gal. |
| GROUND DRIVE | |
| Type | Standard: hydrostatic, 3-speed manual shiftOptional: Prodrive™, autoshift transmission |
| Differential lock | Manual or automatic (optional comes with ProDrive) |
| Maximum transport speed | Hydrostatic transmission: 25 / 30 km/h15.5 / 18.6 mphProDrive transmission: 20 / 25 / 30 / 40 km/h12.4 / 15.5 / 18.6 / 24.9 mph |
| Rear axle type | Hydro-mechanical 4WD |
| Automatic wet brake system | Available with ProDrive transmission |
| Engine rpm - Management | Optional |
| MACHINE MANAGEMENT SOLUTIONS | |
| Yield monitoring | Harvest Monitor™ optional |
| Documentation | Harvest Doc™ optional |
| Crop analysis | HarvestLab™ 3000 optional |
| Length-of-cut control based on crop parameter | Infinitely variable length-of-cut (IVLOC™) standardAutoLOC™ optional with HarvestLab 3000 |
| Satellite (GPS) assisted steering | AutoTrac or Manual RowSense optional |
| CROP-HARVESTING UNITS | |
| Header height control | Advanced header control (AHC) optional |
| Grass pick-ups (transport width) | 3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ftStandard or Premium Line |
| Maize or corn headers | |
| Driveline | Infinitely variable header driveOptional dual header drive for grass pick-up |
| Header connection | Multi-coupler for hydraulic and electricAuto PTO coupler optional |
| HARVEST CHANNEL | |
| Width | 660 mm26 in. |
| LENGTH OF CUT | |
| Range | Range at 1100 rpm:40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps56 knives: 5-19 mm (0.20-0.75 in.) LOC / 1 mm (0.04 in.) stepsRange at 1200 rpm:56 knives: 4-17 mm (0.16-0.67 in.) LOC / 1 mm (0.04 in.) steps64 knives: 3-15 mm (0.12-0.59 in.) LOC / 1 mm (0.04 in.) steps |
| FEEDING SYSTEM/FEEDROLLS | |
| Feed roll frame opening | Swing away, 37-45 degree (angle) |
| Number | Four |
| Metal detector | StandardStone detector is optional |
| Width, front | 660 mm26 in. |
| Standard feed roll drive | Hydro feedroll drive IVLOC standardInfinitely variable header drive speed standard |
| Optional feed roll drive | |
| CUTTERHEAD | |
| Type | Dura-Drum™ cutterhead |
| Cutterhead housing width | 686 mm27 in. |
| Knife drum width | 680 mm26.8 in. |
| Knife drum diameter | 670 mm26.3 in. |
| Speed at rated engine speed | Standard - 1100 rpmOptional - 1200 rpm |
| Knife types available (crop) | Straight - grassCurved - corn |
| Number of knives | 40 - 48 - 56 - 64 |
| Shear bar, reversible | Grass, corn, or Dura Line Plus |
| Shear bar adjust | Fine shearbar adjustQuick shearbar adjust |
| KNIFE SHARPENING SYSTEM | |
| Reverse rotation | Yes |
| Automatic from cab | Yes, remote from cab |
| Reverse drive | Standard |
| Reverse speed | |
| Sharpening modes | Grinding and finishing |
| KERNEL PROCESSOR | |
| Type | Premium KP (8100-8600)XStream KP (8300-8600) |
| Quick-change | Quick kernel processor - swing in/swing out |
| Quick KP removal | Optional: Crane with remote-controlled electric hoist |
| JOHN DEERE PREMIUM KP | |
| Housing | Standard KP housing |
| Lubrication | Grease |
| Roll diameter | 240 mm9.45 in. |
| Speed differential / Roll speed (lower) | 32 percentOptional 40 percent |
| Maize, roll teeth number (speed differential) | 118 (32 / 40 percent) |
| Wholecrop, roll teeth number (speed differential) | 178 (32 / 40 percent) |
| Sorghum, roll teeth number (speed differential) | 238 (32 percent) |
| Weight | 320 kg145 lb |
| Available KP rolls | Standard sawtoothDuraline sawtoothWhole crop |
| JOHN DEERE XSTREAM KP | |
| Housing | Heavy duty housing with KP roll quick exchange system |
| Roll diameter | Pressurized oil |
| Speed differential / Roll speed (lower) | 250 mm9.84 in. |
| Bearing temperature monitoring system | 50 percent |
| Maize, roll teeth number (speed differential) | Optional |
| Wholecrop, roll teeth number (speed differential) | 110 / 145 (50 percent) |
| Sorghum, roll teeth number (speed differential) | 145 / 165 (50 percent) |
| Weight | 238 (32 percent) |
| Available KP rolls | |
| Lubrication | Duraline sawtoothDuraline XCutWhole crop XCut |
| SERRATED ROLLER (KERNEL PROCESSOR) | |
| Maize, roll teeth number (speed differential) | |
| Wholecrop, roll teeth number (speed differential) | |
| Sorghum, roll teeth number (speed differential) | |
| Weight | |
| DISK TYPE (KERNEL PROCESSOR) | |
| Number of disks (top/bottom) | |
| Diameter of disks | |
| Weight | |
| BLOWER/CROP ACCELERATOR | |
| Rotor diameter/housing width | Rotor diameter: 560 mm22.86 in.Housing width: 540 mm21.26 in. |
| Number of blades | 10 |
| Speed (option) | 1800 rpm |
| SPOUT | |
| Rotation, degrees | 210 degree (angle) |
| Hydraulic height position | Hydraulic raise and lower standardAutomatic spout positioning optional |
| Double-cap deflection | Standard |
| Number of wear liners | |
| Reach from center line (Optional) | |
| MAINTENANCE | |
| Rotary radiator screen cleaner | Standard |
| Automatic lubrication system | AutoLube optional |
| Engine oil and filter change duration | JD+50™ II oil: 350 hoursOther oil: 250 hours |
| PROPELLING DRIVE | |
| Standard | Hydrostatic, 3-speed - manual shift with helical gears |
| TRANSMISSION | |
| Type | Standard: Hydrostatic, 3-speed - manual shift with helical gearsHydro-mechanical rear axle optional |
| Weight and Dimension | |
| With front tires | 710/70R42 |
| With rear tires | 620/60R30 |
| Transport length (without header) | 6.6 m21.7 ft |
| Transport width (without header) | 3-3.7 m9.84-12.1 ft |
| Transport height (to cab roof) | 3.89 m12.75 ft |
| Working height (maximum) | Height to spout: 6.60 m21.65 ft |
| Approximate weight (without header) |