| 9600 | MODEL |
|---|---|
| (2018-present) | Years Produced |
| John Deere | Manufacturer |
| D9512 A7 04 | Engine |
| Tier 4 Final/Stage V | Emission |
| 13.5 L | Displacement L |
| In line six | Cylinders |
| Unit injectors plus four valves | Fuel System |
| Optional | Air compressor |
| Wide Body | Body Type |
| COOLING SYSTEM | |
| 29.8 gal (113) | Cooling system capacity |
| Direct | Cooling fan drive |
| GROUND DRIVE | |
| 12/16/19/25 mph(20/25/30/40km/h) | Maximum transport speed |
| Hydro-Mechanical 4- WD | Rear Axle type |
| Standard | Automatic wet brake system |
| Standard | Engine rpm- Management |
| LENGTH OF CUT | |
| 0.27-1"LOC/1100 rpm (7-26mm LOC/1100rpm) | 40 knives cutterhead |
| 0.24-0.87in LOC/1100 rpm(6-22mm LOC/1100 rpm) | 48 knives cutterhead |
| 0.2-0.75in LOC/1100 rpm/(5-19mm LOC/1100 rpm)0.16-0.67in LOC/1200rpm(4-17mm LOC/1200rpm) | 56 knives cutterhead |
| FEEDROLLS | |
| Swing away, 37-45"(angle) | Feed roll frame opening |
| Four | Number feedrolls |
| Standard | Metal detector |
| Optional | Stone detector |
| 32.68 in(830mm) | Feeding channel width,front |
| Standard | Hydro feedroll drive with infinite Variable Length of Cut |
| HEADER CONNECTION | |
| Standard | Infinitely varialbe header drive |
| Standard | Lateral Pivoting frame |
| Standard | Multi coupler |
| Optional | Auto PTO coupler |
| Standard | Header height and float pressure control |
| Optional Advanced Header Control (AHC) | Hydraulic acutated lateral header tilt |
| 9.8,13.1,14.8ft (3.0,4.0,4.5m) | Grass pick-ups (transport width) |
| 8,10,12 rows | Corn headers |
| CUTTERHEAD | |
| Dura-Drum cutterhead | Type |
| 33.46 in (850mm) | Cutterhead width |
| 26.38 in (670mm) | Cutterhead diameter |
| 1100 rpm / 1200 (Option) | Speed at rated engine speed |
| 40-48-56 | Number of knives |
| Straight (grass/universal) Curved (corn) | Knife types available (crop) |
| Grass,Corn or Dura Line Plus | Shearbar options |
| Standard | Fine Shearbar Adjust |
| Standard | Quick Shearbar Adjust |
| KNIFE SHARPENING SYSTEM | |
| Yes | Reverse rotation |
| Remote from Cab | Sharpening control |
| Grinding and finishing | Sharpeining modes |
| KERNEL PROCESSOR | |
| Premium KP, XSTREAM KP | Available KP types |
| Crane from remote controlled electric hoist | Quick KP removal |
| KERNEL PROCESSING OPTIONS | |
| PREMIUM KP | |
| Standard KP housing | Housing |
| Grease | Lubrication |
| 9.45 in (240mm) | Roll daimeter |
| 32% (optional: 40%) | Speed differential |
| 118 | Corn, saw teeth number |
| 178 | Wholecrop, saw teeth number |
| XSTREAM KP | |
| Heavy Duty Housing | Housing |
| Pressurized oil | Lubrication |
| 9.84in (250mm) | Roll diameter |
| 50 | Speed differential (%) |
| 110/145 | Corn, saw teeth number |
| 145/165 | Wholecrop, saw teeth number |
| CROP ACCELERATOR | |
| 22 /24 in. (560/620mm) | Rotor Diameter / Width |
| 10 | Number of blades |
| 1800 | Rotor Speed (rpm) |
| SPOUT | |
| 210 degrees | Rotation |
| 15.5 ft (optional:19.25ft)22ft{4.73m (optional: 5.87m)6.71m} | Reach from center line (ft)(optional)(ft) |
| Height to spout: 21.7ft(6.6m) | Working height (maximum) |
| Optional | Spout Camera |
| Optional | Active Fill Control |
| AGRICULTURAL MANANGEMENT SOULUTIONS | |
| Harvest Monitor optional | Yield monitoring |
| Harvest Doc optional | Documentaion |
| HarvestLab 3000 optional | Crop analysis |
| Auto LOC optioanl with HavestLab 3000 | Length-of-cut control based on crop |
| AutoTrac or Manual RowSense optional | Assisted steering |
| Weights and Dimensions | |
| 21.7ft (6.6m) | Transport Length (without header) |
| 10.2-11.5ft (1.3-3.49m) | Transport width (without header) |
| Below 13.1ft (4.0m) | Transport height (to top of roof) |
| Weight |