| nt_header_0 | John Deere 800R Floater |
|---|---|
| Peak rated power | 272 kW365 hp |
| Transport speed range | 0 to 74 km/h0 to 46 mph |
| Transmission type | |
| Chassis | Dual c-channel frame |
| Dry Spinner spreader - Type | DN495 Dry Spinner Spreader |
| Dry Spinner spreader - Capacity | 9.34 m3330 cu ft |
| Dry Spinner spreader - Spread width range | 18.29 to 27.43 m60 to 90 ft |
| Air Boom - Type | AB485 Air Boom |
| Air Boom - Capacity | 8.49 m3300 cu ft |
| Air Boom - Spread width range | 21.3 m70 ft |
| Make | |
| Peak rated power | 272 kW365 hp |
| Power bulge | 298 kW400 hp |
| Emissions | Final Tier 4 (FT4) |
| Number of cylinders | Six |
| Displacement | 9.0 L584 cu in. |
| Fuel tank capacity | 586 L155 gal. |
| Diesel exhaust fluid (DEF) tank capacity | 29.5 L7.8 gal. |
| Drive | Full-time two-wheel drive (2WD) |
| Spreading in field speed range (dry box) | 0 to 48 km/h0 to 30 mph |
| Transport speed range | 0 to 74 km/h0 to 46 mph |
| Transmission type | |
| Chassis | Dual c-channel frame |
| Suspension | Four-wheel leaf spring and front axle dampers |
| Axle type | |
| Steering | Front wheel |
| Air compressor | On-board air compressor |
| Primary brakes | IVT and four-wheel pneumatic brakes |
| Parking brakes | IVT and two-wheel (rear) pneumatic parking brake |
| Turning radius | 10.5 m39 ft |
| Front tires | 750/50R26 tires - Alliance, Michelin®, or Trelleborg® (option) |
| Rear tires | 1050/50R32 tires - Alliance or Michelin (option) |
| Ladder raise/lower | Automatic |
| Empty weight with single bin | 14,061 kg31,000 lb |
| Cab type | |
| Receivers | |
| Software activations | |
| Machine connectivity | |
| Display | 4600 CommandCenter |
| Radio | |
| Lighting | Deluxe halogen lighting packageLight-emitting diode (LED) lighting package (option) |
| Type | DN495 Dry Spinner Spreader |
| Box material | 409 painted stainless steel304 stainless steel (option) |
| Box length | 4.27 m14 ft |
| Capacity | 9.34 m3330 cu ft |
| Spread width range | 18.29 to 27.43 m60 to 90 ft |
| Spreading control | |
| Automatic section control | John Deere Section Control (G5 box) |
| Box options | Single binTwo-bin MultApplier insert (option)Four-bin MultiBin insert (option) |
| Conveyor | Single bin - belt-over chainMultApplier and MultiBin - belt-over stainless-steel chain |
| Oiler | Electric |
| Type | AB485 Air Boom |
| Box material | 304 painted stainless steel409 painted stainless steel |
| Box length | 3.66 m12 ft |
| Capacity | 8.49 m3300 cu ft |
| Spread width | 21.3 m70 ft |
| Spreading control | |
| Automatic section control | John Deere Section Control |
| Box options | Two-bin capable of 50/50 or 60/40 split |
| Conveyor | Dual conveyors (left and right) with stainless-steel chain |
| Oiler | None |
| Gate height physical adjustable range | 2.5-5.3 cm1-2.1 in.NOTE: The gate is set from the factory at 3.8 cm (1.5 in.). It is not recommended to adjust the gate height below 3.8 cm (1.5 in.) as operators may experience conveyor performance issues such as belt stalling or it may affect rate accuracy. |
| Controllable conveyer rpm range | Bin 1 and Bin 2 running separately: 2-70 rpmBin 1 and Bin 2 running at the same time: 2-40 rpm |
| Conveyor application rates | 56-1345 kg/ha50-1200 lb per acre*Assuming 16.1-km/h (10-mph) vehicle speed, 1041.2 kg/m3 (65 lb/cu ft) material, and 3.8-cm (1.5-in.) gate height. This also assumes CFR 0.2758.NOTE: 1345 kg/ha (1200 lb/acre) is the maximum rate between all bins with the assumptions listed above. 56 kg/ha (50 lb/acre) is the minimum rate from a single bin (1 or 2) with the assumptions listed above. |
| Controllable metering rpm | Bin 3 (granular bin): 3-61 rpm |
| Metering application rates | 6.7-139 kg/ha6-124 lb per acre*Assuming a yellow metering roller, 16.1-km/h (10-mph) vehicle speed, and 1041.2 kg/m3 (65 lb/cu ft) material. This also assumes a CFR of 0.0442. |
| Volumetric flow rate | Less than 0.74 m3/min26.1 cu ft/minNOTE: Plugging of booms may occur if the sum of the flow rate of all bins is greater than spec. NOTE: To calculate the volumetric flow rate per bin: volumetric flow rate (cu ft/min) = (rate (lb/acre) x speed (MPH) x 0.1414)/density (cu ft). Constant of 0.1414 assumes 21.3-m (70-ft) spreading width. |
| Beacon lights | Front- and rear-mounted beacon lights |
| Date collected | 10-Oct-2017 |