nt_header_0 | John Deere 412R |
---|---|
KEY SPECS | |
Rated engine power | |
Maximum engine power | |
Solution system - Capacity | 6057 L1600 gal. |
Rinse tank capacity | 606 L160 gal. |
Boom length options/Material | Steel: 27.4, 30.5, or 36.6 m90, 100, or 120 ftCarbon: 36.6 or 40.2 m120 or 132 ft |
Spray speed range | 0 to 40.2 km/h0 to 25 mph |
Transport speed, maximum | 56.3 km/h35 mph |
Suspension | Dual-strut independent wheel air-ride suspension |
Crop clearance with standard tires | 152.4 cm60 in. |
Total weight (empty solution tank) | 17,225 kg37,974 lb*Includes: 36.6-m (120-ft) steel boom, pressure recirculation, ExactApply™, and 38.1-cm (15-in.) spacing. Weight will vary depending on all options. |
ENGINE | |
Make | |
Rated engine power | 243 kW326 hp |
Maximum engine power | |
Power bulge | |
Emissions | Final Tier 4 (FT4) |
Number of cylinders | Six |
Displacement | 9.0 L549 cu in. |
Transmission | |
Alternator | 250 amp |
Fuel tank capacity | 565 L149.2 gal. |
Diesel exhaust fluid (DEF) tank capacity | 29.5 L7.8 gal. |
AutoTrac speed, maximum | |
SOLUTION SYSTEM | |
Capacity | 6057 L1600 gal. |
Tank material | Stainless steel |
Rinse tank capacity | 606 L160 gal. |
Solution pump flow | |
Quick fill size | 7.6 cm3 in. |
Rate control make | |
Automatic section control | John Deere Section Control (optional) |
Display | |
Solution system control | ManualOption: Automatic |
Fill location | Side fill, front fill (optional), and LoadCommand (optional) |
Fill pump flow | |
Chemical injection method | |
Chemical eductor | Stainless steel |
Chemical eductor capacity (size) | 32 L8.5 gal. |
Flow meter size | 5.1 cm2 in. |
Suction strainer | 20 mesh |
Pressure strainer | 50 mesh |
Boom strainer | 80 mesh |
BOOM | |
Boom length options | Steel: 27.4, 30.5, or 36.6 m90, 100, or 120 ftCarbon: 36.6 or 40.2 m120 or 132 ft |
Automatic boom height | BoomTrac Pro 2 - five sensor (optional) |
Plumbing material | Stainless or polypropylene |
Boom Material | Steel or carbon fiber |
Ground height adjustment | 50 to 245 cm19.6 to 96.5 in. |
Breakaway width | 1.83 m6 ft |
Boom sections | 13 sections with boom length: 40.2 m132 ft11 sections with boom length: 36.6 m120 ft9 sections with boom length: 30.5 m100 ft7 sections with boom length: 27.4 m90 ft |
Nozzle spacings | |
DRIVETRAIN | |
Type | Hydrostatic |
Drive | Full-time four-wheel drive (4WD) |
Shifting | Electrohydraulic |
Hydraulic reservoir capacity | 98.4 L26 gal. |
Spray speed range | 0 to 40.2 km/h0 to 25 mph |
Transport speed, maximum | 56.3 km/h35 mph |
CHASSIS | |
Type | |
Dry compatible | Yes: 5.7 m3200 cu ft |
Suspension | Dual-strut independent wheel air-ride suspension |
Crop clearance with standard tires | 152.4 cm60 in. |
Front tires | 320/90 R46, 380/90 R46, or 420/80 R46 |
Rear tires | 320/90 R46, 380/90 R46, or 420/80 R46 |
Flotation tires | 520/85R38 or 620/70R38 (field installed only) |
Hydraulic tread adjust | Standard |
Wheel tread spacing | 305 to 406.4 cm120 to 160 in. |
Wheel base | 430 cm169.3 in. |
Turning radius | 8.7 m28.5 ft |
Parking brake | Spring-engaged, hydraulic-disengaged wet disk pack |
Primary brakes | Hydrostatic |
Ladder raise/lower | Automatic |
Total weight with 80-ft boom | |
Total weight with 90-ft boom | |
Total weight with 100-ft boom | |
Total weight with 120-ft boom | |
Total weight with carbon fiber boom (empty solution tank) | 16,631 kg36,665 lb*Includes: 40.2-m (132-ft) carbon fiber boom, pressure recirculation, ExactApply, and 50.8-cm (20-in.) spacing. Weight will vary depending on all options. |
Total weight (empty solution tank) | |
OPTIONS | |
Pressure washer | |
Air compressor | Standard: Onboard air |
Foam marker capacity | Injection foamer |
Remote service tools | |
ADDITIONAL INFORMATION | |
Date collected | 1 March 2021 |