| Model |
8700 |
| Years Produced |
(2016-current) |
|
|
| Maximum power at 1800 rpm |
563 kW766 PS / 755 hp |
| Engine |
TypeCummins QSK 19.0LExhaust emission regulation compliancy - Tier 2Displacement19 L1159.4 cu in.ModelEurope: Cummins QSK 19755North America: Cummins QSK 19755CylindersInline 6 |
| Fuel system |
Unit injectors plus four valves |
| Fuel tank capacity |
1,500 L396.3 U.S. gal. |
| DEF tank capacity ( for FT4 or EU Stage V emission level) |
|
| Hand wash tank capacity |
|
| ENGINE POWER |
|
| Maximum power at 1800 rpm |
563 kW766 PS / 755 hp |
| Maximum power at 1900 rpm |
|
| Rated power at 2100 rpm |
|
| Fuel tank capacity |
1500 L396.3 U.S. gal. |
| DEF tank capacity ( for FT4 or EU Stage V emission level) |
|
| ENGINE |
|
| Manufacturer |
|
| Type |
Cummins QSK 19.0LExhaust emission regulation compliancy - Tier 2 |
| Model |
Europe: Cummins QSK 19755North America: Cummins QSK 19755 |
| Displacement |
19 L1159.4 cu in. |
| Cylinders |
In line six |
| Speed on road |
1400-2100 rpm |
| Engine/ground speed management |
Optional |
| Fuel system |
Unit injectors plus four valves |
| COOLING SYSTEM |
|
| Cooling system capacity |
130 L34.34 U.S. gal. |
| Cooling fan drive |
Direct |
| DRIVELINE |
|
| Ground drive |
Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm |
| Hydraulics |
Load sensing |
| Crop harvesting unit |
Harvest channel wide |
| Crop flow components |
Low-friction crop-flow concept |
| Main clutch |
Dry clutch |
| Number of discs |
One disc |
| Main driveband |
Reinforced with Kevlar inserts |
| Belt tensioning |
Active, hydraulic pressure |
| Main driveband, polybelt belts |
Eight belts |
| ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM |
|
| Type/voltage |
12 / 24 V |
| Batteries/battery quantity/capacity |
3 x 174 amp-hr |
| Alternator |
200 amp |
| Hydraulic system capacity |
50 L13.2 U.S. gal. |
| GROUND DRIVE |
|
| Type |
|
| Differential lock |
Manual or automatic ProDrive |
| Maximum transport speed |
Hydrostatic transmission: 30 km/h18.6 mphProDrive transmission: 40 km/h24.9 mph |
| Rear axle type |
Hydro-mechanical 4WD |
| Automatic wet brake system |
Standard |
| Engine rpm - Management |
Optional |
| CAB |
|
| Tilt and extend steering column |
Standard |
| Air conditioning and heater |
Standard - ClimaTrak |
| Cool box |
Optional |
| Trainee seat |
Standard |
| Hectare counter |
Standard |
| Operator information system |
Cornerpost display |
| CAN-BUS electronics |
Standard |
| Operator's seat |
Air-suspension seat optional |
| Side window wiper |
Rear and side window wiper optionalParallel-type windscreen wiper |
| Electric adjust and heated |
Optional on rear view mirrors |
| Rear view mirrors |
Standard |
| Hand wash tank capacity |
|
| MACHINE MANAGEMENT SOLUTIONS |
|
| Yield monitoring |
Harvest Monitor™ optional |
| Documentation |
Harvest Doc™ optional |
| Crop analysis |
HarvestLab™ optional |
| Length-of-cut control based on crop parameter |
Infinitely variable length-of-cut (IVLOC™) standard |
| Satellite (GPS) assisted steering |
AutoTrac™ optional |
| CROP-HARVESTING UNITS |
|
| Header height control |
Advanced header control (AHC) optional |
| Grass pick-ups (transport width) |
3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ft |
| Maize or corn headers |
|
| Driveline |
|
| Header connection |
|
| HARVEST CHANNEL |
|
| Width |
|
| LENGTH OF CUT |
|
| Range |
40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps |
| FEEDING SYSTEM/FEEDROLLS |
|
| Feed roll frame opening |
Swing away, 37-45 degree (angle) |
| Number |
Four |
| Metal detector |
StandardStone detector is optional |
| Width, front |
830 mm32.7 in. |
| Standard feed roll drive |
Hydro feedroll drive IVLOC standardInfinitely header drive speed standard |
| Optional feed roll drive |
|
| CUTTERHEAD |
|
| Type |
|
| Cutterhead housing width |
856 mm33.7 in. |
| Knife drum width |
850 mm33.5 in. |
| Knife drum diameter |
670 mm26.3 in. |
| Speed at rated engine speed |
Standard - 1100 rpmOptional - 1200 rpm |
| Knife types available (crop) |
Straight - grassCurved - corn |
| Number of knives |
40 or 48 |
| Shear bar, reversible |
Standard |
| Shear bar adjust |
|
| KNIFE SHARPENING SYSTEM |
|
| Reverse rotation |
Yes |
| Automatic from cab |
Yes, remote from cab |
| Reverse drive |
Standard |
| Reverse speed |
|
| Sharpening modes |
|
| KERNEL PROCESSOR |
|
| Type |
Serrated roller |
| Quick-change |
Quick kernel processor - swing in/swing out |
| Quick KP removal |
|
| SERRATED ROLLER (KERNEL PROCESSOR) |
|
| Maize, roll teeth number (speed differential) |
118 - 24 or 32 percent |
| Wholecrop, roll teeth number (speed differential) |
178 - 32 percent |
| Sorghum, roll teeth number (speed differential) |
238 - 32 percent |
| Weight |
163.3 kg360 lb |
| DISK TYPE (KERNEL PROCESSOR) |
|
| Number of disks (top/bottom) |
17/16 plus 2-1/2 |
| Diameter of disks |
240 mm9.45 in. |
| Weight |
190.5 kg420 kg |
| BLOWER/CROP ACCELERATOR |
|
| Rotor diameter/housing width |
Rotor diameter: 560 mm22 in.Housing width: 619.8 mm24.4 in. |
| Number of blades |
10 |
| Speed (option) |
1800 rpm |
| SPOUT |
|
| Rotation, degrees |
210 degree (angle) |
| Hydraulic height position |
Hydraulic raise and lower standardAutomatic spout positioning optional |
| Double-cap deflection |
Standard |
| Number of wear liners |
|
| Reach from center line (Optional) |
|
| MAINTENANCE |
|
| Rotary radiator screen cleaner |
Standard |
| Automatic lubrication system |
AutoLube optional |
| Engine oil and filter change duration |
JD+50™ II oil: 350 hoursOther oil: 250 hours |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PROPELLING DRIVE |
|
| Standard |
Prodrive autoshift transmission |
| TRANSMISSION |
|
| Type |
Prodrive autoshift transmissionHydro-mechanical rear axle optional |
|
|
| Weights and Dimensions |
|
| With front tires |
710/70R42 |
| With rear tires |
620/60R30 |
| Transport length (without header) |
6.6 m21.7 ft |
| Transport width (without header) |
3-3.7 m9.84-12.1 ft |
| Transport height (to cab roof) |
3.89 m12.75 ft |
| Working height (maximum) |
Height to spout: 6.60 m21.65 ft |
