Deere 8000 series Large Forage Harvester

Model	Years Produced		Maximum power at 1800 rpm	Engine	Fuel system	Fuel tank capacity	DEF tank capacity ( for FT4 or EU Stage V emission level)	Hand wash tank capacity	ENGINE POWER	Maximum power at 1800 rpm	Maximum power at 1900 rpm	Rated power at 2100 rpm	Fuel tank capacity	DEF tank capacity ( for FT4 or EU Stage V emission level)	ENGINE	Manufacturer	Type	Model	Displacement	Cylinders	Speed on road	Engine/ground speed management	Fuel system	COOLING SYSTEM	Cooling system capacity	Cooling fan drive	DRIVELINE	Ground drive	Hydraulics	Crop harvesting unit	Crop flow components	Main clutch	Number of discs	Main driveband	Belt tensioning	Main driveband, polybelt belts	ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM	Type/voltage	Batteries/battery quantity/capacity	Alternator	Hydraulic system capacity	GROUND DRIVE	Type	Differential lock	Maximum transport speed	Rear axle type	Automatic wet brake system	Engine rpm - Management	CAB	Tilt and extend steering column	Air conditioning and heater	Cool box	Trainee seat	Hectare counter	Operator information system	CAN-BUS electronics	Operator's seat	Side window wiper	Electric adjust and heated	Rear view mirrors	Hand wash tank capacity	MACHINE MANAGEMENT SOLUTIONS	Yield monitoring	Documentation	Crop analysis	Length-of-cut control based on crop parameter	Satellite (GPS) assisted steering	CROP-HARVESTING UNITS	Header height control	Grass pick-ups (transport width)	Maize or corn headers	Driveline	Header connection	HARVEST CHANNEL	Width	LENGTH OF CUT	Range	FEEDING SYSTEM/FEEDROLLS	Feed roll frame opening	Number	Metal detector	Width, front	Standard feed roll drive	Optional feed roll drive	CUTTERHEAD	Type	Cutterhead housing width	Knife drum width	Knife drum diameter	Speed at rated engine speed	Knife types available (crop)	Number of knives	Shear bar, reversible	Shear bar adjust	KNIFE SHARPENING SYSTEM	Reverse rotation	Automatic from cab	Reverse drive	Reverse speed	Sharpening modes	KERNEL PROCESSOR	Type	Quick-change	Quick KP removal	SERRATED ROLLER (KERNEL PROCESSOR)	Maize, roll teeth number (speed differential)	Wholecrop, roll teeth number (speed differential)	Sorghum, roll teeth number (speed differential)	Weight	DISK TYPE (KERNEL PROCESSOR)	Number of disks (top/bottom)	Diameter of disks	Weight	BLOWER/CROP ACCELERATOR	Rotor diameter/housing width	Number of blades	Speed (option)	SPOUT	Rotation, degrees	Hydraulic height position	Double-cap deflection	Number of wear liners	Reach from center line (Optional)	MAINTENANCE	Rotary radiator screen cleaner	Automatic lubrication system	Engine oil and filter change duration									PROPELLING DRIVE	Standard	TRANSMISSION	Type		Weights and Dimensions	With front tires	With rear tires	Transport length (without header)	Transport width (without header)	Transport height (to cab roof)	Working height (maximum)	Approximate weight (without header)
8700	(2016-current)		563 kW766 PS / 755 hp	TypeCummins QSK 19.0LExhaust emission regulation compliancy - Tier 2Displacement19 L1159.4 cu in.ModelEurope: Cummins QSK 19755North America: Cummins QSK 19755CylindersInline 6	Unit injectors plus four valves	1,500 L396.3 U.S. gal.				563 kW766 PS / 755 hp			1500 L396.3 U.S. gal.				Cummins QSK 19.0LExhaust emission regulation compliancy - Tier 2	Europe: Cummins QSK 19755North America: Cummins QSK 19755	19 L1159.4 cu in.	In line six	1400-2100 rpm	Optional	Unit injectors plus four valves		130 L34.34 U.S. gal.	Direct		Prodrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm	Load sensing	Harvest channel wide	Low-friction crop-flow concept	Dry clutch	One disc	Reinforced with Kevlar inserts	Active, hydraulic pressure	Eight belts		12 / 24 V	3 x 174 amp-hr	200 amp	50 L13.2 U.S. gal.			Manual or automatic ProDrive	Hydrostatic transmission: 30 km/h18.6 mphProDrive transmission: 40 km/h24.9 mph	Hydro-mechanical 4WD	Standard	Optional		Standard	Standard - ClimaTrak	Optional	Standard	Standard	Cornerpost display	Standard	Air-suspension seat optional	Rear and side window wiper optionalParallel-type windscreen wiper	Optional on rear view mirrors	Standard			Harvest Monitor optional	Harvest Doc optional	HarvestLab optional	Infinitely variable length-of-cut (IVLOC) standard	AutoTrac optional		Advanced header control (AHC) optional	3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ft							40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps		Swing away, 37-45 degree (angle)	Four	StandardStone detector is optional	830 mm32.7 in.	Hydro feedroll drive IVLOC standardInfinitely header drive speed standard				856 mm33.7 in.	850 mm33.5 in.	670 mm26.3 in.	Standard - 1100 rpmOptional - 1200 rpm	Straight - grassCurved - corn	40 or 48	Standard			Yes	Yes, remote from cab	Standard				Serrated roller	Quick kernel processor - swing in/swing out			118 - 24 or 32 percent	178 - 32 percent	238 - 32 percent	163.3 kg360 lb		17/16 plus 2-1/2	240 mm9.45 in.	190.5 kg420 kg		Rotor diameter: 560 mm22 in.Housing width: 619.8 mm24.4 in.	10	1800 rpm		210 degree (angle)	Hydraulic raise and lower standardAutomatic spout positioning optional	Standard				Standard	AutoLube optional	JD+50 II oil: 350 hoursOther oil: 250 hours										Prodrive autoshift transmission		Prodrive autoshift transmissionHydro-mechanical rear axle optional			710/70R42	620/60R30	6.6 m21.7 ft	3-3.7 m9.84-12.1 ft	3.89 m12.75 ft	Height to spout: 6.60 m21.65 ft
8800	(2016-current)		563 kW843PS / 832hp	TypeCummins QSK 19.0LExhaust emission regulation compliancy - Tier 2Displacement19 L1159.4 cu in.ModelEurope: Cummins QSK 19755North America: Cummins QSK 19755CylindersInline 6	Unit injectors plus four valves	1,500 L396.3 U.S. gal.				563 kW843 PS / 832 hp			1500 L396.3 U.S. gal.				Cummins QSK 19.0LExhaust emission regulation compliancy - Tier 2	Europe: Cummins QSK 19755North America: Cummins QSK 19755	19 L1159.4 cu in.	In line six	1400-2100 rpm	Optional	Unit injectors plus four valves		130 L34.34 U.S. gal.	Direct		Prodrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm	Load sensing	Harvest channel wide	Low-friction crop-flow concept	Dry clutch	One disc	Reinforced with Kevlar inserts	Active, hydraulic pressure	Eight belts		12 / 24 V	3 x 174 amp-hr	200 amp	50 L13.2 U.S. gal.			Manual or automatic ProDrive	Hydrostatic transmission: 30 km/h18.6 mphProDrive transmission: 40 km/h24.9 mph	Hydro-mechanical 4WD	Standard	Optional		Standard	Standard - ClimaTrak	Optional	Standard	Standard	Cornerpost display	Standard	Air-suspension seat optional	Rear and side window wiper optionalParallel-type windscreen wiper	Optional on rear view mirrors	Standard			Harvest Monitor optional	Harvest Doc optional	HarvestLab optional	Infinitely variable length-of-cut (IVLOC) standard	AutoTrac optional		Advanced header control (AHC) optional	3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ft							40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps		Swing away, 37-45 degree (angle)	Four	StandardStone detector is optional	830 mm32.7 in.	Hydro feedroll drive IVLOC standardInfinitely header drive speed standard				856 mm33.7 in.	850 mm33.5 in.	670 mm26.3 in.	Standard - 1100 rpmOptional - 1200 rpm	Straight - grassCurved - corn	40 or 48	Standard			Yes	Yes, remote from cab	Standard				Serrated roller	Quick kernel processor - swing in/swing out			118 - 24 or 32 percent	178 - 32 percent	238 - 32 percent	163.3 kg360 lb		17/16 plus 2-1/2	240 mm9.45 in.	190.5 kg420 kg		Rotor diameter: 560 mm22 in.Housing width: 619.8 mm24.4 in.	10	1800 rpm		210 degree (angle)	Hydraulic raise and lower standardAutomatic spout positioning optional	Standard				Standard	AutoLube optional	JD+50 II oil: 350 hoursOther oil: 250 hours										Prodrive autoshift transmission		Prodrive autoshift transmissionHydro-mechanical rear axle optional			710/70R42	620/60R30	6.6 m21.7 ft	3-3.7 m9.84-12.1 ft	3.89 m12.75 ft	Height to spout: 6.60 m21.65 ft