| nt_header_0 | John Deere 204SP Hagie™ Self-Propelled Detasseler¹ |
|---|---|
| Engine | Peak rated power129 kW173 hp |
| Detasseling speed range | Low range: 0 to 16.1 km/h0 to 10 mphHigh range: 0 to 20.9 km/h0 to 13 mph |
| Transport speed, maximum | 20.9 km/h13 mph |
| Suspension | Independent air-ride |
| Crop clearance with standard tires | 195.6 cm77 in. |
| Peak rated power | 129 kW173 hp |
| Emissions | Final Tier 4 (FT4)/Stage V |
| Number of cylinders | Four |
| Displacement | 4.5 L275 cu in. |
| Alternator | 120 amp |
| Fuel tank capacity | 340.7 L90 gal. |
| Diesel exhaust fluid (DEF) tank capacity | 21.6 L5.7 gal. |
| Glass | 5.45 m258.7 sq ft |
| Seat | Air suspension |
| Instructional seat | Standarded |
| Windshield wiper | Single blade |
| Toolbar outriggers | 12-row: 340.4 cm134 in. |
| Row configurations | 12 |
| Detasseling control system | Tasseltrol |
| Cutter height range | Lower lift position range: 55.4 to 222.5 cm21.8 to 87.6 in.Upper lift position range: 75.1 to 242.2 cm29.6 to 95.4 in. |
| Puller height range | Lower lift position range: 46.2 to 213.3 cm18.2 to 83.9 in.Upper lift position range: 65.9 to 233 cm25.9 to 91.7 in. |
| Quad Puller operating speed | Factory setpoint: 450 rpm |
| Cutter operating speed | Factory setpoint: 2800 rpm |
| Option 1 | Quad Puller - 12 Row 6 LiftRow spacing: 76.2 cm30 in. |
| Option 2 | Cutter - 12 Row 6 LiftRow spacing: 76.2 cm30 in. |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Type | Hydrostatic |
| Drive | Full-time four-wheel drive (4WD) |
| Shifting | Dual speed range |
| Hydraulic reservoir capacity | 65.3 L17.25 gal. |
| Detasseling speed range | Low range: 0 to 16.1 km/h0 to 10 mphHigh range: 0 to 20.9 km/h0 to 13 mph |
| Transport speed, maximum | 20.9 km/h13 mph |
| Dry compatible | No |
| Suspension | Independent air-ride |
| Crop clearance with standard tires | 195.6 cm77 in. |
| Front tires | Titan® 12.4 x 38 |
| Rear tires | Titan 12.4 x 38 |
| Flotation tires | |
| Hydraulic tread adjust | Manual only |
| Wheel tread spacing | 254 to 304.8 cm100 to 120 in. |
| Wheelbase | 307.3 cm121 in. |
| Turning radius | 5.5 m18 ft |
| Parking brake | Integrated in final drives |
| Primary brakes | Drive system dynamic braking |
| Ladder raise/lower | Fixed ladder |
| Approximate dry weight | Based off of a 12 row 6 lift machine with cutters: 6965.8 kg15,357 lb |
| Date collected | 23-Aug-23 |