| nt_header_0 | John Deere 408R Sprayer |
|---|---|
| Rated engine power | 206 kW280 hp |
| Maximum engine power | 224 kW300 hp |
| Solution system - Capacity | 3028 L800 gal. |
| Rinse tank capacity | 454.2 L120 gal. |
| Boom length options/Material | 18.3/27.4, 18.3/30.5, 22/36.6, or 22/40.2 m60/90, 60/100, 72/120, or 72/132 ftBoom material: Steel or carbon fiber |
| Spray speed range | 0 to 32.2 km/h0 to 20 mph |
| Transport speed, maximum | 48.3 km/h30 mph |
| Suspension | Dual-strut independent wheel air-ride suspension |
| Crop clearance with standard tires | 152 cm60 in. |
| Total weight (empty solution tank) | 13,757 kg30,328 lb*Includes: 30.5-m (100-ft) steel boom, pressure recirculation, ExactApply™, and 38.1-cm (15-in.) spacing. Weight will vary depending on all options. |
| Make | |
| Rated engine power | 209 kW280 hp |
| Maximum engine power | 224 kW300 hp |
| Power bulge | |
| Emissions | Final Tier 4 (FT4) |
| Number of cylinders | Six |
| Displacement | 6.8 L415 cu in. |
| Transmission | |
| Alternator | 250 amp |
| Fuel tank capacity | 485.2 L128.2 gal. |
| Diesel exhaust fluid (DEF) tank capacity | 29.5 L7.8 gal. |
| AutoTrac speed, maximum | |
| Capacity | 3028 L800 gal. |
| Tank material | Stainless steel or polyethylene |
| Rinse tank capacity | 454.2 L120 gal. |
| Solution pump flow | |
| Quick fill size | 7.6 cm3 in. |
| Rate control make | |
| Automatic section control | John Deere Section Control (optional) |
| Display | |
| Solution system control | ManualOptional: Automatic |
| Fill location | Side fill, front fill (optional) |
| Fill pump flow | |
| Chemical injection method | Dual-pump direct injectionOptional: up to 511 L135 U.S. gal. |
| Chemical eductor | Stainless steel (optional) |
| Chemical eductor capacity (size) | 32 L8.5 gal. |
| Flow meter size | 5.1 cm2 in. |
| Suction strainer | 20 mesh |
| Pressure strainer | 50 mesh |
| Boom strainer | 80 mesh |
| Boom length options | 18.3/27.4, 18.3/30.5, 22/36.6, or 22/40.2 m60/90, 60/100, 72/120, or 72/132 ft |
| Automatic boom height | BoomTrac Pro 2 - five sensor (optional) |
| Plumbing material | Stainless steelOptional: Polyethylene |
| Boom Material | Steel or carbon fiber |
| Ground height adjustment | 50 to 245 cm19.6 to 96.5 in. |
| Breakaway width | Stainless-steel boom: 3.3 m10.8 ftCarbon fiber boom: 3.7 m12.1 ft |
| Boom sections | 13 sections with boom length: 40.2 m132 ft11 sections with boom length: 36.6 m120 ft9 sections with boom length: 30.5 m100 ft7 sections with boom length: 27.4 m90 ft |
| Nozzle spacings | 38.1 or 50.8 cm15 or 20 in. |
| Type | Hydrostatic |
| Drive | Full-time four-wheel drive (4WD) |
| Shifting | Electrohydraulic |
| Hydraulic reservoir capacity | 98 L26 gal. |
| Spray speed range | 0 to 32.2 km/h0 to 20 mph |
| Transport speed, maximum | 48.3 km/h30 mph |
| Type | |
| Dry compatible | Yes: 5.7 m3200 cu ft |
| Suspension | Dual-strut independent wheel air-ride suspension |
| Crop clearance with standard tires | 152 cm60 in. |
| Front tires | 320/90 R46, 380/90 R46, or 420/80 R46 |
| Rear tires | 320/90 R46, 380/90 R46, or 420/80 R46 |
| Flotation tires | 520/85R38 or 620/70R38 (field installed only) |
| Hydraulic tread adjust | Standard |
| Wheel tread spacing | 305 to 406 cm120 to 160 in. |
| Wheel base | 430 cm169.3 in. |
| Turning radius | 8.7 m28.5 ft |
| Parking brake | Spring-engaged, hydraulically disengaged wet disk pack |
| Primary brakes | Hydrostatic |
| Ladder raise/lower | Automatic |
| Total weight with 80-ft boom | |
| Total weight with 90-ft boom | |
| Total weight with 100-ft boom | |
| Total weight with 120-ft boom | |
| Total weight with carbon fiber boom (empty solution tank) | |
| Total weight (empty solution tank) | 30,328 kg*Includes: 30.5-m (100-ft) steel boom, pressure recirculation, ExactApply, and 38.1-cm (15-in.) spacing. Weight will vary depending on all options. |
| Pressure washer | |
| Air compressor | Standard: Onboard air |
| Foam marker capacity | Air injection foamer: 5.7 L1.5 gal. |
| Remote service tools | |
| Date collected | 1-Mar-2021 |