| 8800 | Model |
|---|---|
| (2016-current) | Years Produced |
| 563 kW843PS / 832hp | Maximum power at 1800 rpm |
| TypeCummins QSK 19.0LExhaust emission regulation compliancy - Tier 2Displacement19 L1159.4 cu in.ModelEurope: Cummins QSK 19755North America: Cummins QSK 19755CylindersInline 6 | Engine |
| Unit injectors plus four valves | Fuel system |
| 1,500 L396.3 U.S. gal. | Fuel tank capacity |
| DEF tank capacity ( for FT4 or EU Stage V emission level) | |
| Hand wash tank capacity | |
| ENGINE POWER | |
| 563 kW843 PS / 832 hp | Maximum power at 1800 rpm |
| Maximum power at 1900 rpm | |
| Rated power at 2100 rpm | |
| 1500 L396.3 U.S. gal. | Fuel tank capacity |
| DEF tank capacity ( for FT4 or EU Stage V emission level) | |
| ENGINE | |
| Manufacturer | |
| Cummins QSK 19.0LExhaust emission regulation compliancy - Tier 2 | Type |
| Europe: Cummins QSK 19755North America: Cummins QSK 19755 | Model |
| 19 L1159.4 cu in. | Displacement |
| In line six | Cylinders |
| 1400-2100 rpm | Speed on road |
| Optional | Engine/ground speed management |
| Unit injectors plus four valves | Fuel system |
| COOLING SYSTEM | |
| 130 L34.34 U.S. gal. | Cooling system capacity |
| Direct | Cooling fan drive |
| DRIVELINE | |
| Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm | Ground drive |
| Load sensing | Hydraulics |
| Harvest channel wide | Crop harvesting unit |
| Low-friction crop-flow concept | Crop flow components |
| Dry clutch | Main clutch |
| One disc | Number of discs |
| Reinforced with Kevlar inserts | Main driveband |
| Active, hydraulic pressure | Belt tensioning |
| Eight belts | Main driveband, polybelt belts |
| ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM | |
| 12 / 24 V | Type/voltage |
| 3 x 174 amp-hr | Batteries/battery quantity/capacity |
| 200 amp | Alternator |
| 50 L13.2 U.S. gal. | Hydraulic system capacity |
| GROUND DRIVE | |
| Type | |
| Manual or automatic ProDrive | Differential lock |
| Hydrostatic transmission: 30 km/h18.6 mphProDrive transmission: 40 km/h24.9 mph | Maximum transport speed |
| Hydro-mechanical 4WD | Rear axle type |
| Standard | Automatic wet brake system |
| Optional | Engine rpm - Management |
| MACHINE MANAGEMENT SOLUTIONS | |
| Harvest Monitor™ optional | Yield monitoring |
| Harvest Doc™ optional | Documentation |
| HarvestLab™ optional | Crop analysis |
| Infinitely variable length-of-cut (IVLOC™) standard | Length-of-cut control based on crop parameter |
| AutoTrac™ optional | Satellite (GPS) assisted steering |
| CROP-HARVESTING UNITS | |
| Advanced header control (AHC) optional | Header height control |
| 3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ft | Grass pick-ups (transport width) |
| Maize or corn headers | |
| Driveline | |
| Header connection | |
| HARVEST CHANNEL | |
| Width | |
| LENGTH OF CUT | |
| 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps | Range |
| FEEDING SYSTEM/FEEDROLLS | |
| Swing away, 37-45 degree (angle) | Feed roll frame opening |
| Four | Number |
| StandardStone detector is optional | Metal detector |
| 830 mm32.7 in. | Width, front |
| Hydro feedroll drive IVLOC standardInfinitely header drive speed standard | Standard feed roll drive |
| Optional feed roll drive | |
| CUTTERHEAD | |
| Type | |
| 856 mm33.7 in. | Cutterhead housing width |
| 850 mm33.5 in. | Knife drum width |
| 670 mm26.3 in. | Knife drum diameter |
| Standard - 1100 rpmOptional - 1200 rpm | Speed at rated engine speed |
| Straight - grassCurved - corn | Knife types available (crop) |
| 40 or 48 | Number of knives |
| Standard | Shear bar, reversible |
| Shear bar adjust | |
| KNIFE SHARPENING SYSTEM | |
| Yes | Reverse rotation |
| Yes, remote from cab | Automatic from cab |
| Standard | Reverse drive |
| Reverse speed | |
| Sharpening modes | |
| KERNEL PROCESSOR | |
| Serrated roller | Type |
| Quick kernel processor - swing in/swing out | Quick-change |
| Quick KP removal | |
| SERRATED ROLLER (KERNEL PROCESSOR) | |
| 118 - 24 or 32 percent | Maize, roll teeth number (speed differential) |
| 178 - 32 percent | Wholecrop, roll teeth number (speed differential) |
| 238 - 32 percent | Sorghum, roll teeth number (speed differential) |
| 163.3 kg360 lb | Weight |
| DISK TYPE (KERNEL PROCESSOR) | |
| 17/16 plus 2-1/2 | Number of disks (top/bottom) |
| 240 mm9.45 in. | Diameter of disks |
| 190.5 kg420 kg | Weight |
| BLOWER/CROP ACCELERATOR | |
| Rotor diameter: 560 mm22 in.Housing width: 619.8 mm24.4 in. | Rotor diameter/housing width |
| 10 | Number of blades |
| 1800 rpm | Speed (option) |
| SPOUT | |
| 210 degree (angle) | Rotation, degrees |
| Hydraulic raise and lower standardAutomatic spout positioning optional | Hydraulic height position |
| Standard | Double-cap deflection |
| Number of wear liners | |
| Reach from center line (Optional) | |
| MAINTENANCE | |
| Standard | Rotary radiator screen cleaner |
| AutoLube optional | Automatic lubrication system |
| JD+50™ II oil: 350 hoursOther oil: 250 hours | Engine oil and filter change duration |
| PROPELLING DRIVE | |
| Prodrive autoshift transmission | Standard |
| TRANSMISSION | |
| Prodrive autoshift transmissionHydro-mechanical rear axle optional | Type |
| Weights and Dimensions | |
| 710/70R42 | With front tires |
| 620/60R30 | With rear tires |
| 6.6 m21.7 ft | Transport length (without header) |
| 3-3.7 m9.84-12.1 ft | Transport width (without header) |
| 3.89 m12.75 ft | Transport height (to cab roof) |
| Height to spout: 6.60 m21.65 ft | Working height (maximum) |
| Approximate weight (without header) |