| Model | 8700 |
|---|---|
| Years Produced | (2016-current) |
| Maximum power at 1800 rpm | 563 kW766 PS / 755 hp |
| Engine | TypeCummins QSK 19.0LExhaust emission regulation compliancy - Tier 2Displacement19 L1159.4 cu in.ModelEurope: Cummins QSK 19755North America: Cummins QSK 19755CylindersInline 6 |
| Fuel system | Unit injectors plus four valves |
| Fuel tank capacity | 1,500 L396.3 U.S. gal. |
| DEF tank capacity ( for FT4 or EU Stage V emission level) | |
| Hand wash tank capacity | |
| ENGINE POWER | |
| Maximum power at 1800 rpm | 563 kW766 PS / 755 hp |
| Maximum power at 1900 rpm | |
| Rated power at 2100 rpm | |
| Fuel tank capacity | 1500 L396.3 U.S. gal. |
| DEF tank capacity ( for FT4 or EU Stage V emission level) | |
| ENGINE | |
| Manufacturer | |
| Type | Cummins QSK 19.0LExhaust emission regulation compliancy - Tier 2 |
| Model | Europe: Cummins QSK 19755North America: Cummins QSK 19755 |
| Displacement | 19 L1159.4 cu in. |
| Cylinders | In line six |
| Speed on road | 1400-2100 rpm |
| Engine/ground speed management | Optional |
| Fuel system | Unit injectors plus four valves |
| COOLING SYSTEM | |
| Cooling system capacity | 130 L34.34 U.S. gal. |
| Cooling fan drive | Direct |
| DRIVELINE | |
| Ground drive | Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm |
| Hydraulics | Load sensing |
| Crop harvesting unit | Harvest channel wide |
| Crop flow components | Low-friction crop-flow concept |
| Main clutch | Dry clutch |
| Number of discs | One disc |
| Main driveband | Reinforced with Kevlar inserts |
| Belt tensioning | Active, hydraulic pressure |
| Main driveband, polybelt belts | Eight belts |
| ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM | |
| Type/voltage | 12 / 24 V |
| Batteries/battery quantity/capacity | 3 x 174 amp-hr |
| Alternator | 200 amp |
| Hydraulic system capacity | 50 L13.2 U.S. gal. |
| GROUND DRIVE | |
| Type | |
| Differential lock | Manual or automatic ProDrive |
| Maximum transport speed | Hydrostatic transmission: 30 km/h18.6 mphProDrive transmission: 40 km/h24.9 mph |
| Rear axle type | Hydro-mechanical 4WD |
| Automatic wet brake system | Standard |
| Engine rpm - Management | Optional |
| MACHINE MANAGEMENT SOLUTIONS | |
| Yield monitoring | Harvest Monitor™ optional |
| Documentation | Harvest Doc™ optional |
| Crop analysis | HarvestLab™ optional |
| Length-of-cut control based on crop parameter | Infinitely variable length-of-cut (IVLOC™) standard |
| Satellite (GPS) assisted steering | AutoTrac™ optional |
| CROP-HARVESTING UNITS | |
| Header height control | Advanced header control (AHC) optional |
| Grass pick-ups (transport width) | 3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ft |
| Maize or corn headers | |
| Driveline | |
| Header connection | |
| HARVEST CHANNEL | |
| Width | |
| LENGTH OF CUT | |
| Range | 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps |
| FEEDING SYSTEM/FEEDROLLS | |
| Feed roll frame opening | Swing away, 37-45 degree (angle) |
| Number | Four |
| Metal detector | StandardStone detector is optional |
| Width, front | 830 mm32.7 in. |
| Standard feed roll drive | Hydro feedroll drive IVLOC standardInfinitely header drive speed standard |
| Optional feed roll drive | |
| CUTTERHEAD | |
| Type | |
| Cutterhead housing width | 856 mm33.7 in. |
| Knife drum width | 850 mm33.5 in. |
| Knife drum diameter | 670 mm26.3 in. |
| Speed at rated engine speed | Standard - 1100 rpmOptional - 1200 rpm |
| Knife types available (crop) | Straight - grassCurved - corn |
| Number of knives | 40 or 48 |
| Shear bar, reversible | Standard |
| Shear bar adjust | |
| KNIFE SHARPENING SYSTEM | |
| Reverse rotation | Yes |
| Automatic from cab | Yes, remote from cab |
| Reverse drive | Standard |
| Reverse speed | |
| Sharpening modes | |
| KERNEL PROCESSOR | |
| Type | Serrated roller |
| Quick-change | Quick kernel processor - swing in/swing out |
| Quick KP removal | |
| SERRATED ROLLER (KERNEL PROCESSOR) | |
| Maize, roll teeth number (speed differential) | 118 - 24 or 32 percent |
| Wholecrop, roll teeth number (speed differential) | 178 - 32 percent |
| Sorghum, roll teeth number (speed differential) | 238 - 32 percent |
| Weight | 163.3 kg360 lb |
| DISK TYPE (KERNEL PROCESSOR) | |
| Number of disks (top/bottom) | 17/16 plus 2-1/2 |
| Diameter of disks | 240 mm9.45 in. |
| Weight | 190.5 kg420 kg |
| BLOWER/CROP ACCELERATOR | |
| Rotor diameter/housing width | Rotor diameter: 560 mm22 in.Housing width: 619.8 mm24.4 in. |
| Number of blades | 10 |
| Speed (option) | 1800 rpm |
| SPOUT | |
| Rotation, degrees | 210 degree (angle) |
| Hydraulic height position | Hydraulic raise and lower standardAutomatic spout positioning optional |
| Double-cap deflection | Standard |
| Number of wear liners | |
| Reach from center line (Optional) | |
| MAINTENANCE | |
| Rotary radiator screen cleaner | Standard |
| Automatic lubrication system | AutoLube optional |
| Engine oil and filter change duration | JD+50™ II oil: 350 hoursOther oil: 250 hours |
| PROPELLING DRIVE | |
| Standard | Prodrive autoshift transmission |
| TRANSMISSION | |
| Type | Prodrive autoshift transmissionHydro-mechanical rear axle optional |
| Weights and Dimensions | |
| With front tires | 710/70R42 |
| With rear tires | 620/60R30 |
| Transport length (without header) | 6.6 m21.7 ft |
| Transport width (without header) | 3-3.7 m9.84-12.1 ft |
| Transport height (to cab roof) | 3.89 m12.75 ft |
| Working height (maximum) | Height to spout: 6.60 m21.65 ft |
| Approximate weight (without header) |