| 8300 | Model |
|---|---|
| (2016- current) | Years Produced |
| 360 kW490 PS/ 483 hp | Maximum power at 1800 rpm |
| TypePowerTech™ PSS 13.5LExhaust emission regulation compliancy - Final Tier 4 / Stage VDisplacement13.5 L823.8 cu in.ModelEurope: 6135HZ021North America: 6135HZ022CylindersInline 6 | Engine |
| Unit injector plus four valves | Fuel system |
| 1,100 L290.6 U.S. gal. | Fuel tank capacity |
| 43 L11.4 U.S. gal. | DEF tank capacity ( for FT4 or EU Stage V emission level) |
| Hand wash tank capacity | |
| ENGINE POWER | |
| 360 kW490 PS / 483 hp | Maximum power at 1800 rpm |
| Maximum power at 1900 rpm | |
| 333 kW453 PS / 447 hp | Rated power at 2100 rpm |
| 1100 L290.6 U.S. gal. | Fuel tank capacity |
| 43 L11.4 U.S. gal. | DEF tank capacity ( for FT4 or EU Stage V emission level) |
| ENGINE | |
| John Deere | Manufacturer |
| PowerTech™ PSS 13.5 LExhaust emission regulation compliancy - Final Tier 4 / Stage V | Type |
| Europe: 6135HZ021North America: 6135HZ022 | Model |
| 13.5 L823.8 cu in. | Displacement |
| In line six | Cylinders |
| 1400-2100 rpm | Speed on road |
| Optional | Engine/ground speed management |
| Unit injector plus four valves | Fuel system |
| COOLING SYSTEM | |
| 113 L29.85 U.S. gal. | Cooling system capacity |
| Direct | Cooling fan drive |
| DRIVELINE | |
| Standard: Hydrostatic, 3-speed - manual shift with helical gearsEngine rpm on road: 1650 rpmOptional: Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm | Ground drive |
| Load sensing | Hydraulics |
| Harvest channel standard | Crop harvesting unit |
| Low-friction crop-flow concept | Crop flow components |
| Dry clutch | Main clutch |
| One disc | Number of discs |
| Reinforced with Kevlar inserts | Main driveband |
| Active, hydraulic pressure | Belt tensioning |
| Six ribs | Main driveband, polybelt belts |
| HEADER DRIVE | |
| Heavy Duty Gearbox (i=3.75)65cc/63cc (pump/motor displacement) | Type |
| ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM | |
| 13 V | Type/voltage |
| 2 x 174 amp-hr | Batteries/battery quantity/capacity |
| 201 amp | Alternator |
| 50 L13.2 U.S. gal. | Hydraulic system capacity |
| GROUND DRIVE | |
| Standard: hydrostatic, 3-speed manual shiftOptional: Prodrive™, autoshift transmission | Type |
| Manual or automatic (optional comes with ProDrive) | Differential lock |
| Hydrostatic transmission: 25 / 30 km/h15.5 / 18.6 mphProDrive transmission: 20 / 25 / 30 / 40 km/h12.4 / 15.5 / 18.6 / 24.9 mph | Maximum transport speed |
| Hydro-mechanical 4WD | Rear axle type |
| Available with ProDrive transmission | Automatic wet brake system |
| Optional | Engine rpm - Management |
| MACHINE MANAGEMENT SOLUTIONS | |
| Harvest Monitor™ optional | Yield monitoring |
| Harvest Doc™ optional | Documentation |
| HarvestLab™ 3000 optional | Crop analysis |
| Infinitely variable length-of-cut (IVLOC™) standardAutoLOC™ optional with HarvestLab 3000 | Length-of-cut control based on crop parameter |
| AutoTrac or Manual RowSense optional | Satellite (GPS) assisted steering |
| CROP-HARVESTING UNITS | |
| Advanced header control (AHC) optional | Header height control |
| 3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ftStandard or Premium Line | Grass pick-ups (transport width) |
| Maize or corn headers | |
| Infinitely variable header driveOptional dual header drive for grass pick-up | Driveline |
| Multi-coupler for hydraulic and electricAuto PTO coupler optional | Header connection |
| HARVEST CHANNEL | |
| Width | |
| LENGTH OF CUT | |
| Range at 1100 rpm:40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps56 knives: 5-19 mm (0.20-0.75 in.) LOC / 1 mm (0.04 in.) stepsRange at 1200 rpm:56 knives: 4-17 mm (0.16-0.67 in.) LOC / 1 mm (0.04 in.) steps64 knives: 3-15 mm (0.12-0.59 in.) LOC / 1 mm (0.04 in.) steps | Range |
| FEEDING SYSTEM/FEEDROLLS | |
| Swing away, 37-45 degree (angle) | Feed roll frame opening |
| Four | Number |
| StandardStone detector is optional | Metal detector |
| 660 mm26 in. | Width, front |
| Hydro feedroll drive IVLOC standardInfinitely header drive speed standard | Standard feed roll drive |
| Optional feed roll drive | |
| CUTTERHEAD | |
| Dura-Drum™ cutterhead | Type |
| 686 mm27 in. | Cutterhead housing width |
| 680 mm26.8 in. | Knife drum width |
| 670 mm26.3 in. | Knife drum diameter |
| Standard - 1100 rpmOptional - 1200 rpm | Speed at rated engine speed |
| Straight - grassCurved - corn | Knife types available (crop) |
| 40 - 48 - 56 - 64 | Number of knives |
| Grass, corn, or Dura Line Plus | Shear bar, reversible |
| Fine shearbar adjustQuick shearbar adjust | Shear bar adjust |
| KNIFE SHARPENING SYSTEM | |
| Yes | Reverse rotation |
| Yes, remote from cab | Automatic from cab |
| Standard | Reverse drive |
| Reverse speed | |
| Grinding and finishing | Sharpening modes |
| KERNEL PROCESSOR | |
| Premium KP (8100-8600)XStream KP (8300-8600) | Type |
| Quick kernel processor - swing in/swing out | Quick-change |
| Optional: Crane with remote-controlled electric hoist | Quick KP removal |
| JOHN DEERE PREMIUM KP | |
| Standard KP housing | Housing |
| Grease | Lubrication |
| 240 mm9.45 in. | Roll diameter |
| 32 percentOptional 40 percent | Speed differential / Roll speed (lower) |
| 118 (32 / 40 percent) | Maize, roll teeth number (speed differential) |
| 178 (32 / 40 percent) | Wholecrop, roll teeth number (speed differential) |
| 238 (32 percent) | Sorghum, roll teeth number (speed differential) |
| 320 kg145 lb | Weight |
| Standard sawtoothDuraline sawtoothWhole crop | Available KP rolls |
| JOHN DEERE XSTREAM KP | |
| Heavy duty housing with KP roll quick exchange system | Housing |
| Pressurized oil | Roll diameter |
| 250 mm9.84 in. | Speed differential / Roll speed (lower) |
| 50 percent | Bearing temperature monitoring system |
| Optional | Maize, roll teeth number (speed differential) |
| 110 / 145 (50 percent) | Wholecrop, roll teeth number (speed differential) |
| 145 / 165 (50 percent) | Sorghum, roll teeth number (speed differential) |
| 238 (32 percent) | Weight |
| Available KP rolls | |
| Duraline sawtoothDuraline XCutWhole crop XCut | Lubrication |
| SERRATED ROLLER (KERNEL PROCESSOR) | |
| Maize, roll teeth number (speed differential) | |
| Wholecrop, roll teeth number (speed differential) | |
| Sorghum, roll teeth number (speed differential) | |
| Weight | |
| DISK TYPE (KERNEL PROCESSOR) | |
| Number of disks (top/bottom) | |
| Diameter of disks | |
| Weight | |
| BLOWER/CROP ACCELERATOR | |
| Rotor diameter: 560 mm22.86 in.Housing width: 540 mm21.26 in. | Rotor diameter/housing width |
| 10 | Number of blades |
| 1800 rpm | Speed (option) |
| SPOUT | |
| 210 degree (angle) | Rotation, degrees |
| Hydraulic raise and lower standardAutomatic spout positioning optional | Hydraulic height position |
| Standard | Double-cap deflection |
| Number of wear liners | |
| Reach from center line (Optional) | |
| MAINTENANCE | |
| Standard | Rotary radiator screen cleaner |
| AutoLube optional | Automatic lubrication system |
| JD+50™ II oil: 500 hoursOther oil: 250 hours | Engine oil and filter change duration |
| PROPELLING DRIVE | |
| Hydrostatic, 3-speed - manual shift with helical gears | Standard |
| TRANSMISSION | |
| Standard: Hydrostatic, 3-speed - manual shift with helical gearsHydro-mechanical rear axle optional | Type |
| Weight and Dimension | |
| 710/70R42 | With front tires |
| 620/60R30 | With rear tires |
| 6.5 m21.4 ft | Transport length (without header) |
| 3-3.5 m9.84-11.5 ft | Transport width (without header) |
| 3.89 m12.75 ft | Transport height (to cab roof) |
| Height to spout: 6.60 m21.65 ft | Working height (maximum) |
| Approximate weight (without header) |