SPFH John Deere 8800 Large
Model
8800
Years Produced
(2016-current)
Maximum power at 1800 rpm
563 kW843PS / 832hp
Engine
TypeCummins QSK 19.0LExhaust emission regulation compliancy - Tier 2Displacement19 L1159.4 cu in.ModelEurope: Cummins QSK 19755North America: Cummins QSK 19755CylindersInline 6
Fuel system
Unit injectors plus four valves
Fuel tank capacity
1,500 L396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)
Hand wash tank capacity
ENGINE POWER
Maximum power at 1800 rpm
563 kW843 PS / 832 hp
Maximum power at 1900 rpm
Rated power at 2100 rpm
Fuel tank capacity
1500 L396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)
ENGINE
Manufacturer
Type
Cummins QSK 19.0LExhaust emission regulation compliancy - Tier 2
Model
Europe: Cummins QSK 19755North America: Cummins QSK 19755
Displacement
19 L1159.4 cu in.
Cylinders
In line six
Speed on road
1400-2100 rpm
Engine/ground speed management
Optional
Fuel system
Unit injectors plus four valves
COOLING SYSTEM
Cooling system capacity
130 L34.34 U.S. gal.
Cooling fan drive
Direct
DRIVELINE
Ground drive
Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm
Hydraulics
Load sensing
Crop harvesting unit
Harvest channel wide
Crop flow components
Low-friction crop-flow concept
Main clutch
Dry clutch
Number of discs
One disc
Main driveband
Reinforced with Kevlar inserts
Belt tensioning
Active, hydraulic pressure
Main driveband, polybelt belts
Eight belts
ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM
Type/voltage
12 / 24 V
Batteries/battery quantity/capacity
3 x 174 amp-hr
Alternator
200 amp
Hydraulic system capacity
50 L13.2 U.S. gal.
GROUND DRIVE
Type
Differential lock
Manual or automatic ProDrive
Maximum transport speed
Hydrostatic transmission: 30 km/h18.6 mphProDrive transmission: 40 km/h24.9 mph
Rear axle type
Hydro-mechanical 4WD
Automatic wet brake system
Standard
Engine rpm - Management
Optional
CAB
Tilt and extend steering column
Standard
Air conditioning and heater
Standard - ClimaTrak
Cool box
Optional
Trainee seat
Standard
Hectare counter
Standard
Operator information system
Cornerpost display
CAN-BUS electronics
Standard
Operator's seat
Air-suspension seat optional
Side window wiper
Rear and side window wiper optionalParallel-type windscreen wiper
Electric adjust and heated
Optional on rear view mirrors
Rear view mirrors
Standard
Hand wash tank capacity
MACHINE MANAGEMENT SOLUTIONS
Yield monitoring
Harvest Monitor™ optional
Documentation
Harvest Doc™ optional
Crop analysis
HarvestLab™ optional
Length-of-cut control based on crop parameter
Infinitely variable length-of-cut (IVLOC™) standard
Satellite (GPS) assisted steering
AutoTrac™ optional
CROP-HARVESTING UNITS
Header height control
Advanced header control (AHC) optional
Grass pick-ups (transport width)
3.0, 4.0, 4.5 m9.8, 13.1, 14.8 ft
Maize or corn headers
Driveline
Header connection
HARVEST CHANNEL
Width
LENGTH OF CUT
Range
40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps
FEEDING SYSTEM/FEEDROLLS
Feed roll frame opening
Swing away, 37-45 degree (angle)
Number
Four
Metal detector
StandardStone detector is optional
Width, front
830 mm32.7 in.
Standard feed roll drive
Hydro feedroll drive IVLOC standardInfinitely header drive speed standard
Optional feed roll drive
CUTTERHEAD
Type
Cutterhead housing width
856 mm33.7 in.
Knife drum width
850 mm33.5 in.
Knife drum diameter
670 mm26.3 in.
Speed at rated engine speed
Standard - 1100 rpmOptional - 1200 rpm
Knife types available (crop)
Straight - grassCurved - corn
Number of knives
40 or 48
Shear bar, reversible
Standard
Shear bar adjust
KNIFE SHARPENING SYSTEM
Reverse rotation
Yes
Automatic from cab
Yes, remote from cab
Reverse drive
Standard
Reverse speed
Sharpening modes
KERNEL PROCESSOR
Type
Serrated roller
Quick-change
Quick kernel processor - swing in/swing out
Quick KP removal
SERRATED ROLLER (KERNEL PROCESSOR)
Maize, roll teeth number (speed differential)
118 - 24 or 32 percent
Wholecrop, roll teeth number (speed differential)
178 - 32 percent
Sorghum, roll teeth number (speed differential)
238 - 32 percent
Weight
163.3 kg360 lb
DISK TYPE (KERNEL PROCESSOR)
Number of disks (top/bottom)
17/16 plus 2-1/2
Diameter of disks
240 mm9.45 in.
Weight
190.5 kg420 kg
BLOWER/CROP ACCELERATOR
Rotor diameter/housing width
Rotor diameter: 560 mm22 in.Housing width: 619.8 mm24.4 in.
Number of blades
10
Speed (option)
1800 rpm
SPOUT
Rotation, degrees
210 degree (angle)
Hydraulic height position
Hydraulic raise and lower standardAutomatic spout positioning optional
Double-cap deflection
Standard
Number of wear liners
Reach from center line (Optional)
MAINTENANCE
Rotary radiator screen cleaner
Standard
Automatic lubrication system
AutoLube optional
Engine oil and filter change duration
JD+50™ II oil: 350 hoursOther oil: 250 hours
PROPELLING DRIVE
Standard
Prodrive autoshift transmission
TRANSMISSION
Type
Prodrive autoshift transmissionHydro-mechanical rear axle optional
Weights and Dimensions
With front tires
710/70R42
With rear tires
620/60R30
Transport length (without header)
6.6 m21.7 ft
Transport width (without header)
3-3.7 m9.84-12.1 ft
Transport height (to cab roof)
3.89 m12.75 ft
Working height (maximum)
Height to spout: 6.60 m21.65 ft