SPFH John Deere 9900

MODEL	9900
Years Produced	(2018-present)
Manufacturer	Liebherr
Engine	D9512 A7 04
Emission	Tier 4 Final/Stage V
Displacement L	24.2 L
Cylinders	V12
Fuel System	Common rail plus four valves
Air compressor	Standard
Body Type	Wide Body

COOLING SYSTEM
Cooling system capacity	34.3 gal (130 L)
Cooling fan drive	Direct

GROUND DRIVE
Maximum transport speed	12/16/19/25 mph(20/25/30/40km/h)
Rear Axle type	Hydro-Mechanical 4- WD
Automatic wet brake system	Standard
Engine rpm- Management	Standard

LENGTH OF CUT
40 knives cutterhead	0.27-1"LOC/1100 rpm (7-26mm LOC/1100 rpm)
48 knives cutterhead	0.24-0.87in LOC/1100 rpm(6-22mm LOC/1100 rpm)
56 knives cutterhead	0.16-0.71 in LOC /1170rpm(4-18mm LOC /1170rpm)0.16-0.63 in LOC/1350rpm(4-16mm LOC/1350rpm)

FEEDROLLS
Feed roll frame opening	Swing away, 37-45"(angle)
Number feedrolls	Four
Metal detector	Standard
Stone detector	Optional
Feeding channel width,front	32.68 in(830mm)
Hydro feedroll drive with infinite Variable Length of Cut	Standard

HEADER CONNECTION
Infinitely varialbe header drive	Standard
Lateral Pivoting frame	Standard
Multi coupler	Standard
Auto PTO coupler	Optional
Header height and float pressure control	Standard
Hydraulic acutated lateral header tilt	Optional Advanced Header Control (AHC)
Grass pick-ups (transport width)	9.8,13.1,14.8ft (3.0,4.0,4.5m)
Corn headers	8,10,12 rows

CUTTERHEAD
Type	Dura-Drum cutterhead
Cutterhead width	33.46 in (850mm)
Cutterhead diameter	26.38 in (670mm)
Speed at rated engine speed	1170 rpm / 1350 (Option)
Number of knives	40-48-56
Knife types available (crop)	Straight (grass/universal) Curved (corn)
Shearbar options	Grass,Corn or Dura Line Plus
Fine Shearbar Adjust	Standard
Quick Shearbar Adjust	Standard

KNIFE SHARPENING SYSTEM
Reverse rotation	Yes
Sharpening control	Remote from Cab
Sharpeining modes	Grinding and finishing

KERNEL PROCESSOR
Available KP types	Premium KP, XSTREAM KP
Quick KP removal	Crane from remote controlled electric hoist

KERNEL PROCESSING OPTIONS
PREMIUM KP
Housing	-
Lubrication	-
Roll daimeter	-
Speed differential	-
Corn, saw teeth number	-
Wholecrop, saw teeth number	-

XSTREAM KP
Housing	Heavy Duty Housing
Lubrication	Pressurized oil
Roll diameter	9.84in (250mm)
Speed differential (%)	50
Corn, saw teeth number	110/145
Wholecrop, saw teeth number	145/165

CROP ACCELERATOR
Rotor Diameter / Width	22 /24 in. (560/620mm)
Number of blades	10
Rotor Speed (rpm)	1800

SPOUT
Rotation	210 degrees
Reach from center line (ft)(optional)(ft)	15.5 ft (optional:19.25ft)22ft{4.73m (optional: 5.87m)6.71m}
Working height (maximum)	Height to spout: 21.7ft(6.6m)
Spout Camera	Optional
Active Fill Control	Optional

AGRICULTURAL MANANGEMENT SOULUTIONS
Yield monitoring	Harvest Monitor optional
Documentaion	Harvest Doc optional
Crop analysis	HarvestLab 3000 optional
Length-of-cut control based on crop	Auto LOC optioanl with HavestLab 3000
Assisted steering	AutoTrac or Manual RowSense optional

Weights and Dimensions
Transport Length (without header)	21.7ft (6.6m)
Transport width (without header)	10.2-11.5ft (1.3-3.49m)
Transport height (to top of roof)	Below 13.1ft (4.0m)